I love my serger :) I couldn't have stitched these two items so quickly using just a regular sewing machine, and the gauze top would have been a nightmare! The top is "Poetry in Motion" by hotpatterns.com; the skirt is the Gored Skirt from Bernina's My Label 3D Fashion Pattern Software. (Tip: If you make the top, use two rows of 1/4" elastic around the neck & sleeves instead of the 3/4" elastic called for in the directions.)

Gauze can be tricky to stitch, as it tends to stretch out of shape. This top is basically a "bishop" style, with sleeves, front, and back stitched together on the diagonal. By setting the differential feed at about 1.5, the fabric was fed under the presser foot faster than it was pulled out the back, which prevented the gauze from stretching. Bonus: all those ravelly edges were overcast, too!

It's hard to see in the photo, but there are two tiers of ruffles along the lower edge...so not only is the hem stretchy, hard-to-handle gauze, but cut partly on the bias and partly on grain. A serged rolled edge was simple; I don't even want to think how tedious a regular hem would have been!

The skirt was quick and simple. After printing the Gored Skirt pattern I drew points at the lower edge of each segment to create a shaped hem. I roll hemmed the points, then flatlocked all the sections together with the "squiggles" side showing on the outside. Then I stitched the waistband to the top with a 4-thread overlock stitch, inserted the elastic, and it was done!

Why the neatly labeled swatches? One of the classes I'm teaching at Bernina University is on sergers. Erika & I are both traveling to Kansas City tomorrow; we start teaching on Wednesday. I'm not sure we'll have time to blog while we're gone, but we'll have lots of things to share when we get back!